support@cks-tactical.com

DPM Pistol Recoil Spring Assembly Instructions Guide

If you are looking for a simple and straightforward way to assemble standard recoil springs, this guide is here to help. By following these instructions, you will be able to quickly and efficiently set up your recoil springs so that they can perform optimally.

For: Beretta, Alfa – Proj, Caracal, CZ, FN Herstal, H&K, Jericho, Ruger, Sig Sauer, Springfield XD, Sphinx, S&W, Styer, Taurus, Walther, Zastava

ATTENTION: INSTALLATION / SAFETY NOTES: 

  1. Restrict your use of the DPM Recoil Reduction system to only the firearms specified on its packaging. Any other models may result in damaged recoil systems and even harm your pistol itself, so be sure not to make any exceptions!
  2. For optimal functionality, be sure to make use of the springs provided with your purchase. Typically, it is best to select the longest spring as this option provides more leverage and resistance. If other components such as Spring Plugs, Washers or Spacers are included in your package please familiarize yourself with the instructions before proceeding.
  3. Our products are designed to uphold and adhere to existing safety protocols when using a pistol, rather than superseding or invalidating them.
  4. If your pistol has been internally modified, please DO NOT USE THIS PRODUCT. Contact us for more information or a specifically-tailored solution to suit your needs.

Attention: DPM Systems Technologies Ltd and its distributors are not responsible for any damage or injury that may happen due to the incorrect placing or use of its products.

To fit the needs and preferences of any shooter, some DPM Systems are equipped with two or more distinct springs. The longer spring has a heavier pound rating in comparison to its shorter counterpart due to an augmented number of coils that make it stronger overall.

GENERAL INSTALLATION INSTRUCTIONS:

  1. Make sure firearm is unloaded.
  2. Disassemble the pistol.
  3. Replace the standard guide rod with the DPM multi springs system (metallic guide rod) as shown in figure (Fig. 1, 1a, 2, 2a, 3, 3a).

GENERAL INSTALLATION INSTRUCTIONS:

  1. Make sure firearm is unloaded.
  2. Disassemble the pistol.
  3. Replace the standard guide rod with the DPM multi springs system (metallic guide rod) as shown in figure (Fig. 1, 1a, 2, 2a, 3, 3a).
1 DPM RECOIL SYSTEM GENERAL Installation Instructions SAFETY NOTES 1
1 DPM RECOIL SYSTEM GENERAL Installation Instructions SAFETY NOTES 2
1 DPM RECOIL SYSTEM GENERAL Installation Instructions SAFETY NOTES 3
1 DPM RECOIL SYSTEM GENERAL Installation Instructions SAFETY NOTES 4
1 DPM RECOIL SYSTEM GENERAL Installation Instructions SAFETY NOTES 7
21212

4. Ensure that the DPM system is placed in the correct way (Fig. 4).

1 DPM RECOIL SYSTEM GENERAL Installation Instructions SAFETY NOTES 7 1

5. Reassemble the pistol.

6. Before loading the magazine, rack the slide several times to ensure that the DPM system functions unrestricted.

INSTRUCTIONS FOR DPM RECOIL SYSTEMS EQUIPPED WITH SPRING PLUG OR WASHER:

  1. . Use Always the Spring Plug or the Washer if your DPM Recoil System is equipped with.
  2. Insert on the DPM Recoil System an External Spring of your choice with the DPM Spring Plug in the slide pistol (Fig. 5)
1 DPM RECOIL SYSTEM GENERAL Installation Instructions SAFETY NOTES 8

3. Insert the DPM Washer in the slide pistol and then insert the DPM Recoil System with an External Spring of your choice. (Fig. 6 & 7)

888

4. Place the head of the Recoil System to fit in the correct position of the barrel. (Fig. 8)

1 DPM RECOIL SYSTEM GENERAL Installation Instructions SAFETY NOTES 9